mirror of
https://github.com/justcallmekoko/ESP32Marauder.git
synced 2025-12-12 07:40:58 -08:00
Port to CYD 2432S024 GUITION
This commit is contained in:
Just Call Me Koko
29
.github/workflows/build_parallel.yml
vendored
29
.github/workflows/build_parallel.yml
vendored
@@ -17,20 +17,21 @@ jobs:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
board:
|
||||
- { name: "Flipper Zero WiFi Dev Board", flag: "MARAUDER_FLIPPER", fbqn: "esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled", file_name: "flipper", tft: false, tft_file: "", build_dir: "esp32s2", addr: "0x1000" }
|
||||
- { name: "Flipper Zero Multi Board", flag: "MARAUDER_FLIPPER", fbqn: "esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=enabled", file_name: "multiboardS3", tft: false, tft_file: "", build_dir: "esp32s3", addr: "0x0" }
|
||||
- { name: "OG Marauder", flag: "MARAUDER_V4", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "og", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder v6", flag: "MARAUDER_V6", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "v6", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder v6.1", flag: "MARAUDER_V6_1", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "v6_1", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Kit", flag: "MARAUDER_KIT", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "kit", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Mini", flag: "MARAUDER_MINI", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "mini", tft: true, tft_file: "User_Setup_marauder_mini.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "ESP32 LDDB", flag: "ESP32_LDDB", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "esp32_lddb", tft: false, tft_file: "", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Dev Board Pro", flag: "MARAUDER_DEV_BOARD_PRO", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "marauder_dev_board_pro", tft: false, tft_file: "", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "M5StickCPlus", flag: "MARAUDER_M5STICKC", fbqn: "esp32:esp32:m5stick-c:PartitionScheme=min_spiffs", file_name: "m5stickc_plus", tft: true, tft_file: "User_Setup_marauder_m5stickc.h", build_dir: "m5stick-c", addr: "0x1000" }
|
||||
- { name: "M5StickCPlus 2", flag: "MARAUDER_M5STICKCP2", fbqn: "esp32:esp32:m5stick-c:PartitionScheme=min_spiffs", file_name: "m5stickc_plus2", tft: true, tft_file: "User_Setup_marauder_m5stickcp2.h", build_dir: "m5stick-c", addr: "0x1000" }
|
||||
- { name: "Rev Feather", flag: "MARAUDER_REV_FEATHER", fbqn: "esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled", file_name: "rev_feather", tft: true, tft_file: "User_Setup_marauder_rev_feather.h", build_dir: "esp32s2", addr: "0x1000" }
|
||||
- { name: "Marauder v7", flag: "MARAUDER_V7", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "marauder_v7", tft: true, tft_file: "User_Setup_dual_nrf24.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder CYD 2432S028", flag: "MARAUDER_CYD_MICRO", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "cyd_2432S028", tft: true, tft_file: "User_Setup_cyd_micro.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Flipper Zero WiFi Dev Board", flag: "MARAUDER_FLIPPER", fbqn: "esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled", file_name: "flipper", tft: false, tft_file: "", build_dir: "esp32s2", addr: "0x1000" }
|
||||
- { name: "Flipper Zero Multi Board", flag: "MARAUDER_FLIPPER", fbqn: "esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=enabled", file_name: "multiboardS3", tft: false, tft_file: "", build_dir: "esp32s3", addr: "0x0" }
|
||||
- { name: "OG Marauder", flag: "MARAUDER_V4", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "og", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder v6", flag: "MARAUDER_V6", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "v6", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder v6.1", flag: "MARAUDER_V6_1", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "v6_1", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Kit", flag: "MARAUDER_KIT", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "kit", tft: true, tft_file: "User_Setup_og_marauder.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Mini", flag: "MARAUDER_MINI", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "mini", tft: true, tft_file: "User_Setup_marauder_mini.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "ESP32 LDDB", flag: "ESP32_LDDB", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "esp32_lddb", tft: false, tft_file: "", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder Dev Board Pro", flag: "MARAUDER_DEV_BOARD_PRO", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "marauder_dev_board_pro", tft: false, tft_file: "", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "M5StickCPlus", flag: "MARAUDER_M5STICKC", fbqn: "esp32:esp32:m5stick-c:PartitionScheme=min_spiffs", file_name: "m5stickc_plus", tft: true, tft_file: "User_Setup_marauder_m5stickc.h", build_dir: "m5stick-c", addr: "0x1000" }
|
||||
- { name: "M5StickCPlus 2", flag: "MARAUDER_M5STICKCP2", fbqn: "esp32:esp32:m5stick-c:PartitionScheme=min_spiffs", file_name: "m5stickc_plus2", tft: true, tft_file: "User_Setup_marauder_m5stickcp2.h", build_dir: "m5stick-c", addr: "0x1000" }
|
||||
- { name: "Rev Feather", flag: "MARAUDER_REV_FEATHER", fbqn: "esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled", file_name: "rev_feather", tft: true, tft_file: "User_Setup_marauder_rev_feather.h", build_dir: "esp32s2", addr: "0x1000" }
|
||||
- { name: "Marauder v7", flag: "MARAUDER_V7", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "marauder_v7", tft: true, tft_file: "User_Setup_dual_nrf24.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder CYD 2432S028", flag: "MARAUDER_CYD_MICRO", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "cyd_2432S028", tft: true, tft_file: "User_Setup_cyd_micro.h", build_dir: "d32", addr: "0x1000" }
|
||||
- { name: "Marauder CYD 2432S024 GUITION", flag: "MARAUDER_CYD_GUITION", fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs", file_name: "cyd_2432S024_guition", tft: true, tft_file: "User_Setup_cyd_guition.h", build_dir: "d32", addr: "0x1000" }
|
||||
|
||||
steps:
|
||||
- name: Checkout Code
|
||||
|
||||
@@ -31,6 +31,7 @@
|
||||
//#include <User_Setup_dual_nrf24.h>
|
||||
//#include <User_Setup_pocket_sdr_2.h>
|
||||
//#include <User_Setup_cyd_micro.h>
|
||||
//#include <User_Setup_cyd_guition.h>
|
||||
|
||||
//#include <User_Setups/Setup1_ILI9341.h> // Setup file configured for my ILI9341
|
||||
//#include <User_Setups/Setup2_ST7735.h> // Setup file configured for my ST7735
|
||||
|
||||
316
User_Setup_cyd_guition.h
Normal file
316
User_Setup_cyd_guition.h
Normal file
@@ -0,0 +1,316 @@
|
||||
// USER DEFINED SETTINGS
|
||||
// Set driver type, fonts to be loaded, pins used and SPI control method etc
|
||||
//
|
||||
// See the User_Setup_Select.h file if you wish to be able to define multiple
|
||||
// setups and then easily select which setup file is used by the compiler.
|
||||
//
|
||||
// If this file is edited correctly then all the library example sketches should
|
||||
// run without the need to make any more changes for a particular hardware setup!
|
||||
// Note that some sketches are designed for a particular TFT pixel width/height
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 1. Call up the right driver file and any options for it
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// Display type - only define if RPi display
|
||||
//#define RPI_DRIVER
|
||||
|
||||
// Only define one driver, the other ones must be commented out
|
||||
#define ILI9341_DRIVER // OG Marauder
|
||||
//#define ST7735_DRIVER // Marauder Mini // Define additional parameters below for this display
|
||||
//#define ILI9163_DRIVER // Define additional parameters below for this display
|
||||
//#define S6D02A1_DRIVER
|
||||
//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
|
||||
//#define HX8357D_DRIVER
|
||||
//#define ILI9481_DRIVER
|
||||
//#define ILI9486_DRIVER
|
||||
//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
|
||||
//#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display
|
||||
//#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display
|
||||
//#define R61581_DRIVER
|
||||
//#define RM68140_DRIVER
|
||||
//#define ST7796_DRIVER
|
||||
|
||||
// Some displays support SPI reads via the MISO pin, other displays have a single
|
||||
// bi-directional SDA pin and the library will try to read this via the MOSI line.
|
||||
// To use the SDA line for reading data from the TFT uncomment the following line:
|
||||
|
||||
// #define TFT_SDA_READ // This option is for ESP32 ONLY, tested with ST7789 display only
|
||||
|
||||
// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
|
||||
// Try ONE option at a time to find the correct colour order for your display
|
||||
|
||||
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
|
||||
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
||||
|
||||
// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
|
||||
|
||||
// #define M5STACK
|
||||
|
||||
// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
|
||||
// #define TFT_WIDTH 80
|
||||
// #define TFT_WIDTH 128 // Marauder Mini
|
||||
#define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320
|
||||
// #define TFT_HEIGHT 160
|
||||
// #define TFT_HEIGHT 128 // Marauder Mini
|
||||
// #define TFT_HEIGHT 240 // ST7789 240 x 240
|
||||
#define TFT_HEIGHT 320 // ST7789 240 x 320
|
||||
|
||||
// For ST7735 ONLY, define the type of display, originally this was based on the
|
||||
// colour of the tab on the screen protector film but this is not always true, so try
|
||||
// out the different options below if the screen does not display graphics correctly,
|
||||
// e.g. colours wrong, mirror images, or tray pixels at the edges.
|
||||
// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
|
||||
// this User_Setup file, then rebuild and upload the sketch to the board again:
|
||||
|
||||
// #define ST7735_INITB
|
||||
// #define ST7735_GREENTAB
|
||||
// #define ST7735_GREENTAB2
|
||||
// #define ST7735_GREENTAB3
|
||||
// #define ST7735_GREENTAB128 // For 128 x 128 display
|
||||
// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
|
||||
// #define ST7735_REDTAB
|
||||
// #define ST7735_BLACKTAB
|
||||
// #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset
|
||||
|
||||
// If colours are inverted (white shows as black) then uncomment one of the next
|
||||
// 2 lines try both options, one of the options should correct the inversion.
|
||||
|
||||
// #define TFT_INVERSION_ON
|
||||
// #define TFT_INVERSION_OFF
|
||||
|
||||
// If a backlight control signal is available then define the TFT_BL pin in Section 2
|
||||
// below. The backlight will be turned ON when tft.begin() is called, but the library
|
||||
// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
|
||||
// driven with a PWM signal or turned OFF/ON then this must be handled by the user
|
||||
// sketch. e.g. with digitalWrite(TFT_BL, LOW);
|
||||
|
||||
// #define TFT_BACKLIGHT_ON LOW // HIGH or LOW are options
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 2. Define the pins that are used to interface with the display here
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
|
||||
// Typical setup for ESP8266 NodeMCU ESP-12 is :
|
||||
//
|
||||
// Display SDO/MISO to NodeMCU pin D6 (or leave disconnected if not reading TFT)
|
||||
// Display LED to NodeMCU pin VIN (or 5V, see below)
|
||||
// Display SCK to NodeMCU pin D5
|
||||
// Display SDI/MOSI to NodeMCU pin D7
|
||||
// Display DC (RS/AO)to NodeMCU pin D3
|
||||
// Display RESET to NodeMCU pin D4 (or RST, see below)
|
||||
// Display CS to NodeMCU pin D8 (or GND, see below)
|
||||
// Display GND to NodeMCU pin GND (0V)
|
||||
// Display VCC to NodeMCU 5V or 3.3V
|
||||
//
|
||||
// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
|
||||
//
|
||||
// The DC (Data Command) pin may be labeled AO or RS (Register Select)
|
||||
//
|
||||
// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
|
||||
// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
|
||||
// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
|
||||
// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
|
||||
//
|
||||
// The NodeMCU D0 pin can be used for RST
|
||||
//
|
||||
//
|
||||
// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
|
||||
// If 5V is not available at a pin you can use 3.3V but backlight brightness
|
||||
// will be lower.
|
||||
|
||||
|
||||
// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
|
||||
|
||||
// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
|
||||
//#define TFT_CS PIN_D8 // Chip select control pin D8
|
||||
//#define TFT_DC PIN_D3 // Data Command control pin
|
||||
//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
|
||||
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
|
||||
|
||||
//#define TFT_BL PIN_D1 // LED back-light (only for ST7789 with backlight control pin)
|
||||
|
||||
//#define TOUCH_CS PIN_D2 // Chip select pin (T_CS) of touch screen
|
||||
|
||||
//#define TFT_WR PIN_D2 // Write strobe for modified Raspberry Pi TFT only
|
||||
|
||||
|
||||
// ###### FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES ######
|
||||
|
||||
// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
|
||||
// but saves pins for other functions. It is best not to connect MISO as some displays
|
||||
// do not tristate that line wjen chip select is high!
|
||||
// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
|
||||
// On NodeMCU V3 S0 =MISO, S1 =MOSI, S2 =SCLK
|
||||
// In ESP8266 overlap mode the following must be defined
|
||||
|
||||
//#define TFT_SPI_OVERLAP
|
||||
|
||||
// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
|
||||
//#define TFT_CS PIN_D3
|
||||
//#define TFT_DC PIN_D5 // Data Command control pin
|
||||
//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
|
||||
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
|
||||
|
||||
|
||||
// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP ######
|
||||
|
||||
// For ESP32 Dev board (only tested with ILI9341 display)
|
||||
// The hardware SPI can be mapped to any pins
|
||||
|
||||
// Marauder Mini
|
||||
/*
|
||||
#define TFT_CS 17 // Chip select control pin D8
|
||||
#define TFT_DC 16 // Data Command control pin
|
||||
#define TFT_RST 5 // Reset pin (could connect to NodeMCU RST, see next line)
|
||||
//#define TFT_MISO 19
|
||||
//#define TFT_MOSI 23
|
||||
//#define TFT_SCLK 18
|
||||
//#define TFT_BL 32
|
||||
*/
|
||||
|
||||
// ESP32 Marauder
|
||||
#define TFT_MISO 12
|
||||
#define TFT_MOSI 13
|
||||
#define TFT_SCLK 14
|
||||
#define TFT_CS 15 // Chip select control pin
|
||||
#define TFT_DC 2 // Data Command control pin
|
||||
#define TFT_RST -1 // Reset pin (could connect to RST pin)
|
||||
//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
|
||||
|
||||
#define TFT_BL 27 // LED back-light (only for ST7789 with backlight control pin)
|
||||
|
||||
#define TOUCH_CS 33 // Chip select pin (T_CS) of touch screen
|
||||
|
||||
/////////////////////////////
|
||||
|
||||
// ESP32 Centauri
|
||||
/*
|
||||
#define TFT_MISO 19
|
||||
#define TFT_MOSI 23
|
||||
#define TFT_SCLK 18
|
||||
#define TFT_CS 27 // Chip select control pin
|
||||
#define TFT_DC 26 // Data Command control pin
|
||||
#define TFT_RST 5 // Reset pin (could connect to RST pin)
|
||||
//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
|
||||
|
||||
#define TFT_BL 32 // LED back-light (only for ST7789 with backlight control pin)
|
||||
|
||||
#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen
|
||||
*/
|
||||
/////////////////////////////
|
||||
|
||||
//#define TFT_WR 22 // Write strobe for modified Raspberry Pi TFT only
|
||||
|
||||
// For the M5Stack module use these #define lines
|
||||
//#define TFT_MISO 19
|
||||
//#define TFT_MOSI 23
|
||||
//#define TFT_SCLK 18
|
||||
//#define TFT_CS 14 // Chip select control pin
|
||||
//#define TFT_DC 27 // Data Command control pin
|
||||
//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin)
|
||||
//#define TFT_BL 32 // LED back-light (required for M5Stack)
|
||||
|
||||
// ###### EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP ######
|
||||
|
||||
// The library supports 8 bit parallel TFTs with the ESP32, the pin
|
||||
// selection below is compatible with ESP32 boards in UNO format.
|
||||
// Wemos D32 boards need to be modified, see diagram in Tools folder.
|
||||
// Only ILI9481 and ILI9341 based displays have been tested!
|
||||
|
||||
// Parallel bus is only supported on ESP32
|
||||
// Uncomment line below to use ESP32 Parallel interface instead of SPI
|
||||
|
||||
//#define ESP32_PARALLEL
|
||||
|
||||
// The ESP32 and TFT the pins used for testing are:
|
||||
//#define TFT_CS 33 // Chip select control pin (library pulls permanently low
|
||||
//#define TFT_DC 15 // Data Command control pin - must use a pin in the range 0-31
|
||||
//#define TFT_RST 32 // Reset pin, toggles on startup
|
||||
|
||||
//#define TFT_WR 4 // Write strobe control pin - must use a pin in the range 0-31
|
||||
//#define TFT_RD 2 // Read strobe control pin
|
||||
|
||||
//#define TFT_D0 12 // Must use pins in the range 0-31 for the data bus
|
||||
//#define TFT_D1 13 // so a single register write sets/clears all bits.
|
||||
//#define TFT_D2 26 // Pins can be randomly assigned, this does not affect
|
||||
//#define TFT_D3 25 // TFT screen update performance.
|
||||
//#define TFT_D4 17
|
||||
//#define TFT_D5 16
|
||||
//#define TFT_D6 27
|
||||
//#define TFT_D7 14
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 3. Define the fonts that are to be used here
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// Comment out the #defines below with // to stop that font being loaded
|
||||
// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
|
||||
// normally necessary. If all fonts are loaded the extra FLASH space required is
|
||||
// about 17Kbytes. To save FLASH space only enable the fonts you need!
|
||||
|
||||
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
||||
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
||||
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
||||
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
||||
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
||||
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
||||
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
||||
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
||||
|
||||
// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
|
||||
// this will save ~20kbytes of FLASH
|
||||
#define SMOOTH_FONT
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 4. Other options
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// Define the SPI clock frequency, this affects the graphics rendering speed. Too
|
||||
// fast and the TFT driver will not keep up and display corruption appears.
|
||||
// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
|
||||
// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
|
||||
// With an ILI9163 display 27 MHz works OK.
|
||||
|
||||
// #define SPI_FREQUENCY 1000000
|
||||
//#define SPI_FREQUENCY 5000000
|
||||
// #define SPI_FREQUENCY 10000000
|
||||
// #define SPI_FREQUENCY 20000000
|
||||
#define SPI_FREQUENCY 27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
|
||||
// #define SPI_FREQUENCY 40000000
|
||||
// #define SPI_FREQUENCY 80000000
|
||||
|
||||
// Optional reduced SPI frequency for reading TFT
|
||||
#define SPI_READ_FREQUENCY 20000000
|
||||
|
||||
// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
|
||||
#define SPI_TOUCH_FREQUENCY 2500000
|
||||
|
||||
// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
|
||||
// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
|
||||
// then uncomment the following line:
|
||||
#define USE_HSPI_PORT
|
||||
|
||||
// Comment out the following #define if "SPI Transactions" do not need to be
|
||||
// supported. When commented out the code size will be smaller and sketches will
|
||||
// run slightly faster, so leave it commented out unless you need it!
|
||||
|
||||
// Transaction support is needed to work with SD library but not needed with TFT_SdFat
|
||||
// Transaction support is required if other SPI devices are connected.
|
||||
|
||||
// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
|
||||
// so changing it here has no effect
|
||||
|
||||
// #define SUPPORT_TRANSACTIONS
|
||||
@@ -932,7 +932,7 @@ void MenuFunctions::main(uint32_t currentTime)
|
||||
|
||||
// Menu navigation and paging
|
||||
#ifdef HAS_BUTTONS
|
||||
#if !(defined(MARAUDER_V6) || defined(MARAUDER_V6_1) || defined(MARAUDER_CYD_MICRO))
|
||||
#if !(defined(MARAUDER_V6) || defined(MARAUDER_V6_1) || defined(MARAUDER_CYD_MICRO) || defined(MARAUDER_CYD_GUITION))
|
||||
#if !defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5STICKCP2)
|
||||
if (u_btn.justPressed()){
|
||||
if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) ||
|
||||
|
||||
@@ -904,7 +904,7 @@ void WiFiScan::startWiFiAttacks(uint8_t scan_mode, uint16_t color, String title_
|
||||
esp_wifi_set_promiscuous(true);
|
||||
esp_wifi_set_max_tx_power(82);
|
||||
this->wifi_initialized = true;
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.attackLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.attackLED();
|
||||
@@ -929,7 +929,7 @@ bool WiFiScan::shutdownWiFi() {
|
||||
esp_wifi_restore();
|
||||
esp_wifi_deinit();
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.offLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.offLED();
|
||||
@@ -967,7 +967,7 @@ bool WiFiScan::shutdownBLE() {
|
||||
return false;
|
||||
}
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.offLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.offLED();
|
||||
@@ -1564,7 +1564,7 @@ void WiFiScan::RunEvilPortal(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
startLog("evil_portal");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -1612,7 +1612,7 @@ void WiFiScan::RunAPScan(uint8_t scan_mode, uint16_t color)
|
||||
else
|
||||
startPcap("ap_sta");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2223,7 +2223,7 @@ void WiFiScan::RunInfo()
|
||||
|
||||
void WiFiScan::RunPacketMonitor(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2345,7 +2345,7 @@ void WiFiScan::RunPacketMonitor(uint8_t scan_mode, uint16_t color)
|
||||
|
||||
void WiFiScan::RunEapolScan(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2496,7 +2496,7 @@ void WiFiScan::RunPwnScan(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
startPcap("pwnagotchi");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2723,7 +2723,7 @@ void WiFiScan::RunBeaconScan(uint8_t scan_mode, uint16_t color)
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2785,7 +2785,7 @@ void WiFiScan::RunStationScan(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
startPcap("station");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2833,7 +2833,7 @@ void WiFiScan::RunRawScan(uint8_t scan_mode, uint16_t color)
|
||||
if (scan_mode != WIFI_SCAN_SIG_STREN)
|
||||
startPcap("raw");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2899,7 +2899,7 @@ void WiFiScan::RunDeauthScan(uint8_t scan_mode, uint16_t color)
|
||||
{
|
||||
startPcap("deauth");
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -2961,7 +2961,7 @@ void WiFiScan::RunProbeScan(uint8_t scan_mode, uint16_t color)
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -3030,7 +3030,7 @@ void WiFiScan::RunSourApple(uint8_t scan_mode, uint16_t color) {
|
||||
|
||||
this->ble_initialized;
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
@@ -3076,7 +3076,7 @@ void WiFiScan::RunSwiftpairSpam(uint8_t scan_mode, uint16_t color) {
|
||||
|
||||
this->ble_initialized;
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.attackLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.attackLED();
|
||||
@@ -3227,7 +3227,7 @@ void WiFiScan::RunBluetoothScan(uint8_t scan_mode, uint16_t color)
|
||||
Serial.println("Started BLE Scan");
|
||||
this->ble_initialized = true;
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.sniffLED();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.sniffLED();
|
||||
|
||||
@@ -37,7 +37,7 @@
|
||||
#endif
|
||||
#include "settings.h"
|
||||
#include "Assets.h"
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
#include "flipperLED.h"
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
#include "xiaoLED.h"
|
||||
@@ -150,7 +150,7 @@ extern Buffer buffer_obj;
|
||||
extern BatteryInterface battery_obj;
|
||||
#endif
|
||||
extern Settings settings_obj;
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
extern flipperLED flipper_led;
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
extern xiaoLED xiao_led;
|
||||
|
||||
@@ -21,10 +21,11 @@
|
||||
//#define MARAUDER_DEV_BOARD_PRO
|
||||
//#define XIAO_ESP32_S3
|
||||
//#define MARAUDER_REV_FEATHER
|
||||
//#define MARAUDER_CYD_MICRO // 2431S028
|
||||
//#define MARAUDER_CYD_MICRO // 2432S028
|
||||
//#define MARAUDER_CYD_GUITION // ESP32-2432S024 GUITION
|
||||
//// END BOARD TARGETS
|
||||
|
||||
#define MARAUDER_VERSION "v1.4.5"
|
||||
#define MARAUDER_VERSION "v1.4.6"
|
||||
|
||||
#define GRAPH_REFRESH 100
|
||||
|
||||
@@ -47,6 +48,8 @@
|
||||
#define HARDWARE_NAME "Marauder v6.1"
|
||||
#elif defined(MARAUDER_CYD_MICRO)
|
||||
#define HARDWARE_NAME "CYD 2432S028"
|
||||
#elif defined(MARAUDER_CYD_GUITION)
|
||||
#define HARDWARE_NAME "CYD 2432S024 GUITION"
|
||||
#elif defined(MARAUDER_KIT)
|
||||
#define HARDWARE_NAME "Marauder Kit"
|
||||
#elif defined(MARAUDER_FLIPPER)
|
||||
@@ -173,6 +176,24 @@
|
||||
#define HAS_CYD_TOUCH
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_CYD_GUITION
|
||||
#define HAS_FLIPPER_LED
|
||||
//#define FLIPPER_ZERO_HAT
|
||||
//#define HAS_BATTERY
|
||||
#define HAS_BT
|
||||
#define HAS_BT_REMOTE
|
||||
#define HAS_BUTTONS
|
||||
//#define HAS_NEOPIXEL_LED
|
||||
//#define HAS_PWR_MGMT
|
||||
#define HAS_SCREEN
|
||||
#define HAS_FULL_SCREEN
|
||||
#define HAS_SD
|
||||
#define USE_SD
|
||||
#define HAS_TEMP_SENSOR
|
||||
#define HAS_GPS
|
||||
//#define HAS_CYD_TOUCH
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_KIT
|
||||
//#define FLIPPER_ZERO_HAT
|
||||
#define HAS_BATTERY
|
||||
@@ -202,6 +223,7 @@
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#define HAS_FLIPPER_LED
|
||||
//#define FLIPPER_ZERO_HAT
|
||||
//#define HAS_BATTERY
|
||||
//#define HAS_BT
|
||||
@@ -419,6 +441,26 @@
|
||||
#define D_PULL true
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_CYD_GUITION
|
||||
#define L_BTN -1
|
||||
#define C_BTN 0
|
||||
#define U_BTN -1
|
||||
#define R_BTN -1
|
||||
#define D_BTN -1
|
||||
|
||||
//#define HAS_L
|
||||
//#define HAS_R
|
||||
//#define HAS_U
|
||||
//#define HAS_D
|
||||
#define HAS_C
|
||||
|
||||
#define L_PULL true
|
||||
#define C_PULL true
|
||||
#define U_PULL true
|
||||
#define R_PULL true
|
||||
#define D_PULL true
|
||||
#endif
|
||||
|
||||
#endif
|
||||
//// END BUTTON DEFINITIONS
|
||||
|
||||
@@ -766,6 +808,73 @@
|
||||
#define KIT_LED_BUILTIN 13
|
||||
#endif
|
||||
|
||||
#if defined(MARAUDER_CYD_GUITION)
|
||||
#define SCREEN_CHAR_WIDTH 40
|
||||
#define HAS_ILI9341
|
||||
|
||||
#define BANNER_TEXT_SIZE 2
|
||||
|
||||
#ifndef TFT_WIDTH
|
||||
#define TFT_WIDTH 240
|
||||
#endif
|
||||
|
||||
#ifndef TFT_HEIGHT
|
||||
#define TFT_HEIGHT 320
|
||||
#endif
|
||||
|
||||
#define TFT_DIY
|
||||
|
||||
#define GRAPH_VERT_LIM TFT_HEIGHT/2
|
||||
|
||||
#define EXT_BUTTON_WIDTH 20
|
||||
|
||||
#define SCREEN_BUFFER
|
||||
|
||||
#define MAX_SCREEN_BUFFER 22
|
||||
|
||||
#define CHAR_WIDTH 12
|
||||
#define SCREEN_WIDTH TFT_WIDTH
|
||||
#define SCREEN_HEIGHT TFT_HEIGHT
|
||||
#define HEIGHT_1 TFT_WIDTH
|
||||
#define WIDTH_1 TFT_HEIGHT
|
||||
#define STANDARD_FONT_CHAR_LIMIT (TFT_WIDTH/6) // number of characters on a single line with normal font
|
||||
#define TEXT_HEIGHT 16 // Height of text to be printed and scrolled
|
||||
#define BOT_FIXED_AREA 0 // Number of lines in bottom fixed area (lines counted from bottom of screen)
|
||||
#define TOP_FIXED_AREA 48 // Number of lines in top fixed area (lines counted from top of screen)
|
||||
#define YMAX 320 // Bottom of screen area
|
||||
#define minimum(a,b) (((a) < (b)) ? (a) : (b))
|
||||
//#define MENU_FONT NULL
|
||||
#define MENU_FONT &FreeMono9pt7b // Winner
|
||||
//#define MENU_FONT &FreeMonoBold9pt7b
|
||||
//#define MENU_FONT &FreeSans9pt7b
|
||||
//#define MENU_FONT &FreeSansBold9pt7b
|
||||
#define BUTTON_SCREEN_LIMIT 12
|
||||
#define BUTTON_ARRAY_LEN BUTTON_SCREEN_LIMIT
|
||||
#define STATUS_BAR_WIDTH 16
|
||||
#define LVGL_TICK_PERIOD 6
|
||||
|
||||
#define FRAME_X 100
|
||||
#define FRAME_Y 64
|
||||
#define FRAME_W 120
|
||||
#define FRAME_H 50
|
||||
|
||||
// Red zone size
|
||||
#define REDBUTTON_X FRAME_X
|
||||
#define REDBUTTON_Y FRAME_Y
|
||||
#define REDBUTTON_W (FRAME_W/2)
|
||||
#define REDBUTTON_H FRAME_H
|
||||
|
||||
// Green zone size
|
||||
#define GREENBUTTON_X (REDBUTTON_X + REDBUTTON_W)
|
||||
#define GREENBUTTON_Y FRAME_Y
|
||||
#define GREENBUTTON_W (FRAME_W/2)
|
||||
#define GREENBUTTON_H FRAME_H
|
||||
|
||||
#define STATUSBAR_COLOR 0x4A49
|
||||
|
||||
#define KIT_LED_BUILTIN 13
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_V7
|
||||
#define SCREEN_CHAR_WIDTH 40
|
||||
//#define HAS_ILI9341
|
||||
@@ -1100,6 +1209,25 @@
|
||||
//#define BUTTON_ARRAY_LEN 5
|
||||
#endif
|
||||
|
||||
#if defined(MARAUDER_CYD_GUITION)
|
||||
#define BANNER_TIME 100
|
||||
|
||||
#define COMMAND_PREFIX "!"
|
||||
|
||||
// Keypad start position, key sizes and spacing
|
||||
#define KEY_X 120 // Centre of key
|
||||
#define KEY_Y 50
|
||||
#define KEY_W 240 // Width and height
|
||||
#define KEY_H 22
|
||||
#define KEY_SPACING_X 0 // X and Y gap
|
||||
#define KEY_SPACING_Y 1
|
||||
#define KEY_TEXTSIZE 1 // Font size multiplier
|
||||
#define ICON_W 22
|
||||
#define ICON_H 22
|
||||
#define BUTTON_PADDING 22
|
||||
//#define BUTTON_ARRAY_LEN 5
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_V7
|
||||
#define BANNER_TIME 100
|
||||
|
||||
@@ -1212,6 +1340,10 @@
|
||||
#define SD_CS 5
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_CYD_GUITION
|
||||
#define SD_CS 5
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_KIT
|
||||
#define SD_CS 12
|
||||
#endif
|
||||
@@ -1316,6 +1448,8 @@
|
||||
#define MEM_LOWER_LIM 10000
|
||||
#elif defined(MARAUDER_CYD_MICRO)
|
||||
#define MEM_LOWER_LIM 10000
|
||||
#elif defined(MARAUDER_CYD_GUITION)
|
||||
#define MEM_LOWER_LIM 10000
|
||||
#elif defined(MARAUDER_KIT)
|
||||
#define MEM_LOWER_LIM 10000
|
||||
#elif defined(GENERIC_ESP32)
|
||||
@@ -1342,6 +1476,8 @@
|
||||
#define PIN 33
|
||||
#elif defined(MARAUDER_CYD_MICRO)
|
||||
#define PIN 4
|
||||
//#elif defined(MARAUDER_CYD_GUITION)
|
||||
// #define PIN 4
|
||||
#else
|
||||
#define PIN 25
|
||||
#endif
|
||||
@@ -1364,6 +1500,8 @@
|
||||
#define MAX_HTML_SIZE 11400
|
||||
#elif defined(MARAUDER_CYD_MICRO)
|
||||
#define MAX_HTML_SIZE 11400
|
||||
#elif defined(MARAUDER_CYD_GUITION)
|
||||
#define MAX_HTML_SIZE 11400
|
||||
#elif defined(MARAUDER_KIT)
|
||||
#define MAX_HTML_SIZE 11400
|
||||
#elif defined(GENERIC_ESP32)
|
||||
@@ -1393,6 +1531,11 @@
|
||||
#define GPS_TX 27 // Fits the extended I/O
|
||||
#define GPS_RX 22
|
||||
#define mac_history_len 100
|
||||
#elif defined(MARAUDER_CYD_GUITION)
|
||||
#define GPS_SERIAL_INDEX 2
|
||||
#define GPS_TX 21 // Fits the extended I/O
|
||||
#define GPS_RX 22
|
||||
#define mac_history_len 100
|
||||
#elif defined(MARAUDER_V4)
|
||||
#define GPS_SERIAL_INDEX 2
|
||||
#define GPS_TX 4
|
||||
@@ -1486,6 +1629,8 @@
|
||||
#define MARAUDER_TITLE_BYTES 13578
|
||||
#elif defined(MARAUDER_CYD_MICRO)
|
||||
#define MARAUDER_TITLE_BYTES 13578
|
||||
#elif defined(MARAUDER_CYD_GUITION)
|
||||
#define MARAUDER_TITLE_BYTES 13578
|
||||
#elif defined(MARAUDER_KIT)
|
||||
#define MARAUDER_TITLE_BYTES 13578
|
||||
#elif defined(MARAUDER_MINI)
|
||||
@@ -1531,4 +1676,22 @@
|
||||
#endif
|
||||
#endif
|
||||
//// END STUPID CYD STUFF
|
||||
|
||||
//// FUNNY FLIPPER LED STUFF
|
||||
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#define B_PIN 4
|
||||
#define G_PIN 5
|
||||
#define R_PIN 6
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_CYD_GUITION
|
||||
#define B_PIN 17
|
||||
#define G_PIN 16
|
||||
#define R_PIN 4
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//// END FUNNY FLIPPER LED STUFF
|
||||
#endif
|
||||
|
||||
@@ -34,7 +34,7 @@ https://www.online-utility.org/image/convert/to/XBM
|
||||
#endif
|
||||
#include "Buffer.h"
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
#include "flipperLED.h"
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
#include "xiaoLED.h"
|
||||
@@ -105,7 +105,7 @@ CommandLine cli_obj;
|
||||
AXP192 axp192_obj;
|
||||
#endif
|
||||
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipperLED flipper_led;
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiaoLED xiao_led;
|
||||
@@ -286,7 +286,7 @@ void setup()
|
||||
#endif
|
||||
|
||||
// Do some LED stuff
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.RunSetup();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.RunSetup();
|
||||
@@ -387,7 +387,7 @@ void loop()
|
||||
menu_function_obj.main(currentTime);
|
||||
#endif
|
||||
}
|
||||
#ifdef MARAUDER_FLIPPER
|
||||
#ifdef HAS_FLIPPER_LED
|
||||
flipper_led.main();
|
||||
#elif defined(XIAO_ESP32_S3)
|
||||
xiao_led.main();
|
||||
|
||||
@@ -8,10 +8,6 @@
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
#define B_PIN 4
|
||||
#define G_PIN 5
|
||||
#define R_PIN 6
|
||||
|
||||
extern Settings settings_obj;
|
||||
|
||||
class flipperLED {
|
||||
|
||||
Reference in New Issue
Block a user