commit ce261432000086bc80482f35b0007f24d0c39c13 Author: rogueking Date: Sun Nov 24 23:27:53 2024 -0800 first commit diff --git a/configuration.nix b/configuration.nix new file mode 100644 index 0000000..94b96fb --- /dev/null +++ b/configuration.nix @@ -0,0 +1,193 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running ‘nixos-help’). + +{ config, pkgs, inputs, ... }: + +{ + imports = + [ # Include the results of the hardware scan. + ./hardware-configuration.nix + inputs.home-manager.nixosModules.default + ]; + + # Bootloader. + boot.loader.systemd-boot.enable = true; + boot.loader.efi.canTouchEfiVariables = true; + + nix.settings.experimental-features = ["nix-command" "flakes"]; + + networking.hostName = "EVA-01"; # Define your hostname. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Enable networking + networking.networkmanager.enable = true; + + virtualisation.docker.enable = true; + + # Set your time zone. + time.timeZone = "America/Los_Angeles"; + + # Select internationalisation properties. + i18n.defaultLocale = "en_US.UTF-8"; + + i18n.extraLocaleSettings = { + LC_ADDRESS = "en_US.UTF-8"; + LC_IDENTIFICATION = "en_US.UTF-8"; + LC_MEASUREMENT = "en_US.UTF-8"; + LC_MONETARY = "en_US.UTF-8"; + LC_NAME = "en_US.UTF-8"; + LC_NUMERIC = "en_US.UTF-8"; + LC_PAPER = "en_US.UTF-8"; + LC_TELEPHONE = "en_US.UTF-8"; + LC_TIME = "en_US.UTF-8"; + }; + + # Enable the X11 windowing system. + # You can disable this if you're only using the Wayland session. + services.xserver.enable = false; + + # Enable the KDE Plasma Desktop Environment. + services.displayManager.sddm.enable = true; + services.displayManager.sddm.wayland.enable = true; + services.desktopManager.plasma6.enable = true; + + services.tailscale.enable = true; + + services.fprintd.enable = true; + services.fprintd.tod.enable = true; + services.fprintd.tod.driver = pkgs.libfprint-2-tod1-goodix; + + # Configure keymap in X11 + services.xserver.xkb = { + layout = "us"; + variant = ""; + }; + + # Enable CUPS to print documents. + services.printing.enable = false; + + # Enable sound with pipewire. + hardware.pulseaudio.enable = false; + security.rtkit.enable = true; + services.pipewire = { + enable = true; + alsa.enable = true; + alsa.support32Bit = true; + pulse.enable = true; + # If you want to use JACK applications, uncomment this + #jack.enable = true; + + # use the example session manager (no others are packaged yet so this is enabled by default, + # no need to redefine it in your config for now) + #media-session.enable = true; + }; + + # Enable touchpad support (enabled default in most desktopManager). + # services.xserver.libinput.enable = true; + + # Define a user account. Don't forget to set a password with ‘passwd’. + programs.zsh.enable = true; + users.users.rogueking = { + isNormalUser = true; + description = "rogueking"; + extraGroups = [ "networkmanager" "wheel" "docker" ]; + shell = pkgs.zsh; + #packages = [ inputs.home-manager.packages.${pkgs.system}.default ]; + packages = with pkgs; [ + kdePackages.kate + neovim + btop + brave + tldr + bat + vesktop + localsend + # thunderbird + ]; + }; + + # Install firefox. + programs.firefox.enable = true; + + # Allow unfree packages + nixpkgs.config.allowUnfree = true; + + programs._1password.enable = true; + programs._1password-gui = { + enable = true; + # Certain features, including CLI integration and system authentication support, + # require enabling PolKit integration on some desktop environments (e.g. Plasma). + polkitPolicyOwners = [ "rogueking" ]; + }; + + + # Enable OpenSSH daemon + services.openssh.enable = true; + + # List packages installed in system profile. To search, run: + # $ nix search wget + environment.systemPackages = with pkgs; [ + vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + wget + openssh + vesktop + kdePackages.kdeconnect-kde + kdePackages.partitionmanager + fprintd + unzip + ]; + + fonts.packages = with pkgs; [ + nerdfonts + ]; + + home-manager = { + extraSpecialArgs = { inherit inputs; }; + users = { + "rogueking" = import ./home-manager/home.nix; + }; + backupFileExtension = "backup"; + }; + + #home-manager = { + # extraSpecialArgs = { inherit inputs; }; + # users = { + # "rogueking" = import ../home-manager/home.nix; + # }; + # backupFileExtension = "backup"; + #}; + + + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + # programs.gnupg.agent = { + # enable = true; + # enableSSHSupport = true; + # }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + # services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + # networking.firewall.enable = false; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It‘s perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "24.11"; # Did you read the comment? + +} diff --git a/flake.lock b/flake.lock new file mode 100644 index 0000000..c00ef6e --- /dev/null +++ b/flake.lock @@ -0,0 +1,49 @@ +{ + "nodes": { + "home-manager": { + "inputs": { + "nixpkgs": [ + "nixpkgs" + ] + }, + "locked": { + "lastModified": 1731880681, + "narHash": "sha256-FmYTkIyPBUxSWgA7DPIVTsCCMvSSbs56yOtHpLNSnKg=", + "owner": "nix-community", + "repo": "home-manager", + "rev": "aecd341dfead1c3ef7a3c15468ecd71e8343b7c6", + "type": "github" + }, + "original": { + "owner": "nix-community", + "ref": "release-24.11", + "repo": "home-manager", + "type": "github" + } + }, + "nixpkgs": { + "locked": { + "lastModified": 1731755305, + "narHash": "sha256-v5P3dk5JdiT+4x69ZaB18B8+Rcu3TIOrcdG4uEX7WZ8=", + "owner": "nixos", + "repo": "nixpkgs", + "rev": "057f63b6dc1a2c67301286152eb5af20747a9cb4", + "type": "github" + }, + "original": { + "owner": "nixos", + "ref": "nixos-24.11", + "repo": "nixpkgs", + "type": "github" + } + }, + "root": { + "inputs": { + "home-manager": "home-manager", + "nixpkgs": "nixpkgs" + } + } + }, + "root": "root", + "version": 7 +} diff --git a/flake.nix b/flake.nix new file mode 100644 index 0000000..c6191ac --- /dev/null +++ b/flake.nix @@ -0,0 +1,25 @@ +{ + description = "Nixos Config Flake"; + + inputs = { + nixpkgs.url = "github:nixos/nixpkgs/nixos-24.11"; + + home-manager = { + url = "github:nix-community/home-manager/release-24.11"; + inputs.nixpkgs.follows = "nixpkgs"; + }; + }; + + outputs = { self, nixpkgs, home-manager, ... }@inputs: { + nixosConfigurations = { + default = nixpkgs.lib.nixosSystem { + specialArgs = {inherit inputs;}; + system = "x86_64-linux"; + modules = [ + ./configuration.nix + inputs.home-manager.nixosModules.default + ]; + }; + }; + }; +} diff --git a/hardware-configuration.nix b/hardware-configuration.nix new file mode 100644 index 0000000..f9bdbe6 --- /dev/null +++ b/hardware-configuration.nix @@ -0,0 +1,38 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = + [ (modulesPath + "/installer/scan/not-detected.nix") + ]; + + boot.initrd.availableKernelModules = [ "xhci_pci" "thunderbolt" "nvme" "uas" "sd_mod" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ "kvm-intel" ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/0ec1b4fd-ca0f-4938-a038-37a69ec00b21"; + fsType = "ext4"; + }; + + fileSystems."/boot" = + { device = "/dev/disk/by-uuid/2066-E44D"; + fsType = "vfat"; + options = [ "fmask=0077" "dmask=0077" ]; + }; + + swapDevices = [ ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces..useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.wlp0s20f3.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware; +} diff --git a/home-manager/cli-tools.nix b/home-manager/cli-tools.nix new file mode 100644 index 0000000..8f9e85a --- /dev/null +++ b/home-manager/cli-tools.nix @@ -0,0 +1,112 @@ +{ config, pkgs, lib, ... }: + +{ + home.packages = with pkgs; [ + curl + dust + tldr + tailscale + docker + nix-prefetch-github + ]; + +# _: let +# onePassPath = "~/.1password/agent.sock"; + +# in { +# programs.ssh ={ +# enable = true; +# extraConfig = '' +# Host * +# IdentityAgent ${onePassPath} +# ''; +# }; +# } + programs = { + fastfetch.enable = true; + neovim.enable = true; + fzf.enable = true; + bat.enable = true; + btop.enable = true; + kitty.enable = true; + yazi.enable = true; + starship = { + enable = true; + settings = { }; + }; + + git = { + enable = true; + userName = "rogueking"; + userEmail = "miguel@muniz.org"; + }; + + eza = { + enable = true; + icons = "auto"; + enableZshIntegration = true; + extraOptions = [ + "--group-directories-first" + ]; + }; + + zoxide = { + enable = true; + enableZshIntegration = true; + }; + + zsh = { + enable = true; + enableCompletion = true; + autosuggestion.enable = true; + #syntaxHighlighting.enable = true; + historySubstringSearch.enable = true; + plugins = [ + { + name = "fast-syntax-highlighting"; + src = pkgs.fetchFromGitHub { + owner = "zdharma-continuum"; + repo = "fast-syntax-highlighting"; + rev = "cf318e06a9b7c9f2219d78f41b46fa6e06011fd9"; + sha256 = "RVX9ZSzjBW3LpFs2W86lKI6vtcvDWP6EPxzeTcRZua4="; + }; + } +# { +# name = "ohmyzsh-theme-passion"; +# file = "passion.zsh-theme"; +# src = pkgs.fetchFromGitHub { +# owner = "ChesterYue"; +# repo = "ohmyzsh-theme-passion"; +# rev = "7f06398c0a3c046f80f6162047b64a1c0ab7f76d"; +# sha256 = "uFEGxcqkdWCroZ0L3h4G4uE6C75bG6IDbDnptkbxgj0="; +# }; +# } + ]; + + shellAliases = { + ls = "eza --color=auto"; + grep = "grep --color=auto"; + ll = "eza -la"; + lt = "eza --tree"; + cd = "z"; + open = "xdg-open"; + rebuild = "sudo nixos-rebuild switch --flake /etc/nixos#default"; + }; + + initExtra = '' + fastfetch + ''; + + history = { + size = 10000; + path = "${config.xdg.dataHome}/zsh/history"; + }; + + oh-my-zsh = { + enable = true; + custom = "~/.oh-my-zsh/custom"; + theme = "passion"; + }; + }; + }; +} diff --git a/home-manager/home.nix b/home-manager/home.nix new file mode 100644 index 0000000..03e55f4 --- /dev/null +++ b/home-manager/home.nix @@ -0,0 +1,83 @@ +{ config, pkgs, ... }: + +{ + imports = [ + ./cli-tools.nix + ]; + + # Home Manager needs a bit of information about you and the paths it should + # manage. + home.username = "rogueking"; + home.homeDirectory = "/home/rogueking"; + + # This value determines the Home Manager release that your configuration is + # compatible with. This helps avoid breakage when a new Home Manager release + # introduces backwards incompatible changes. + # + # You should not change this value, even if you update Home Manager. If you do + # want to update the value, then make sure to first check the Home Manager + # release notes. + home.stateVersion = "24.11"; # Please read the comment before changing. + + nixpkgs.config.allowUnfree = true; + + # The home.packages option allows you to install Nix packages into your + # environment. + home.packages = with pkgs; [ + # # Adds the 'hello' command to your environment. It prints a friendly + # # "Hello, world!" when run. + # pkgs.hello + obsidian + + # # It is sometimes useful to fine-tune packages, for example, by applying + # # overrides. You can do that directly here, just don't forget the + # # parentheses. Maybe you want to install Nerd Fonts with a limited number of + # # fonts? + # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; }) + + # # You can also create simple shell scripts directly inside your + # # configuration. For example, this adds a command 'my-hello' to your + # # environment: + # (pkgs.writeShellScriptBin "my-hello" '' + # echo "Hello, ${config.home.username}!" + # '') + ]; + + # Home Manager is pretty good at managing dotfiles. The primary way to manage + # plain files is through 'home.file'. + home.file = { + # # Building this configuration will create a copy of 'dotfiles/screenrc' in + # # the Nix store. Activating the configuration will then make '~/.screenrc' a + # # symlink to the Nix store copy. + # ".screenrc".source = dotfiles/screenrc; + + # # You can also set the file content immediately. + # ".gradle/gradle.properties".text = '' + # org.gradle.console=verbose + # org.gradle.daemon.idletimeout=3600000 + # ''; + }; + + # Home Manager can also manage your environment variables through + # 'home.sessionVariables'. These will be explicitly sourced when using a + # shell provided by Home Manager. If you don't want to manage your shell + # through Home Manager then you have to manually source 'hm-session-vars.sh' + # located at either + # + # ~/.nix-profile/etc/profile.d/hm-session-vars.sh + # + # or + # + # ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh + # + # or + # + # /etc/profiles/per-user/sapphiregaze/etc/profile.d/hm-session-vars.sh + # + home.sessionVariables = { + EDITOR = "nvim"; + }; + + # Let Home Manager install and manage itself. + programs.home-manager.enable = true; +}